Dell PowerConnect 5012 - Configuration File Management

14 Addendum to the 3024, 3048, and 5012 User’s Guides
www.dell.com | support.dell.com
Configuration File Management:
• To save the switch’s current configuration file to a server, supply the
TFTP server IP address and configuration filename, and then select
Transfer Configuration File to Server. To load a configuration file
from a server, supply the TPTP server IP address and configuration
filename, and then select Transfer Configuration File from Server.
• To restore the preinstalled configuration, select Restore.
• TFTP Server IP Address — Inserts the TFTP Server IP Address to
save or load.
• TFTP Path/Configuration Filename — Inserts the TFTP Path and
configuration filename to save or load.
• Transfer Configuration File to Server— Saves the switch
configuration file to a server.
• Transfer Configuration File from Server — Loads a configuration file
from a server to the switch.
• Restore — Restores preinstalled default settings.