Need help?Do you have a question about the Dell PowerConnect 6248 and is the answer not in the manual?
General| Layer | Layer 3 |
|---|---|
| VLAN Support | Yes |
| Power | AC 120/230 V (50/60 Hz) |
| RAM | 128 MB |
| Flash Memory | 32 MB |
| Jumbo Frame Support | Yes |
| Power Supply | Internal |
| Operating Temperature | 0 °C to 45 °C |
| Storage Temperature | -20 °C to 70 °C |
| Ports | 48 x 10/100/1000Base-T |
| Stacking | Yes |
| Management | Web, CLI, SNMP |
| Device Type | Switch |
| Enclosure Type | Rack-mountable |
| MAC Address Table Size | 16000 entries |
| Routing Protocol | static IP routing |
| Remote Management Protocol | RMON 1, RMON 2, RMON 3, RMON 9, SNMP 1, SNMP 2, SNMP 3 |
| Features | VLAN support |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1w, IEEE 802.1s |
| Relative Humidity | 10% to 90% (non-condensing) |
Explains formatting for keyboard keys and commands in the document.
Identifies the target audience as experienced system or storage administrators.
Provides links to essential supporting documentation like SAN HQ User Guide.
Lists the necessary serial cables for establishing SAN connections.
Details required operating system components, drivers, and tools for setup.
Outlines prerequisites for VMware ESXi host systems.
Outlines prerequisites for Windows host systems.
Outlines prerequisites for Red Hat Enterprise Linux host systems.
Specifies assumed installed OS versions and patch levels.
Guides users to reference compatibility matrix for recommended switch firmware.
Guides users to reference compatibility matrix for recommended array firmware.
Details static IP addresses and passwords needed for SAN configuration.
Provides detailed port mapping for various switch and array combinations.
To Next Page
