Need help?Do you have a question about the Dell PowerConnect M8024-k and is the answer not in the manual?
Details on configuring M8024-k switches for stacking using 10G SFP+ ports.
Step-by-step CLI instructions for configuring M8024-k stacking ports and firmware synchronization.
GUI-based instructions for configuring M8024-k stacking using the Chassis Management Controller.
Instructions for stacking 8024/8024F switches using 10G SFP+ ports, supporting up to six units.
CLI steps for configuring stacking ports and firmware sync for 8024/8024F switches.
GUI instructions for configuring 8024/8024F stacking via the Web UI.
CLI steps to update firmware on all stack members via a master switch and TFTP server.
GUI steps to update firmware on stack members using the master switch and File Download.
Details on configuring M8024-k switches for stacking using 10G SFP+ ports.
Step-by-step CLI instructions for configuring M8024-k stacking ports and firmware synchronization.
GUI-based instructions for configuring M8024-k stacking using the Chassis Management Controller.
Instructions for stacking 8024/8024F switches using 10G SFP+ ports, supporting up to six units.
CLI steps for configuring stacking ports and firmware sync for 8024/8024F switches.
GUI instructions for configuring 8024/8024F stacking via the Web UI.
CLI steps to update firmware on all stack members via a master switch and TFTP server.
GUI steps to update firmware on stack members using the master switch and File Download.
General| Switching Capacity | 480 Gbps |
|---|---|
| Power Supply | Dual, Hot-swappable |
| Product Type | Switch |
| Data Transfer Rate | 10 Gbps |
| Manageable | Yes |
| MAC Address Table Size | 32, 000 entries |
| Layer | Layer 3 |
| Fibre Channel | No |
| Jumbo Frame Support | Yes, up to 9216 bytes |
| Ports | 24 x 10Gb SFP+ ports |
To Next Page
