Dell PowerEdge C6220 - Page 19

19
FILE LOCATION: D:\Projects\Service Guide\Server\2011_Scorpion\RIS\BMC
Manual\BMC\C6220_BMC_HOM_section1.fm
IPMI
Select the IPMI submenu to view the IPMI-based communication service
parameters. Users with administrator or operator privileges can configure the
IPMI settings.
Table 1-8. IPMI
Item Description
IPMI Serial
Connection Mode
Settings
Select a mode of communication for the serial interface.
• Direct Connection Basic Mode: This mode supports a
binary interface for program access, such as IPMI shell
(ipmish) that is included with the BMC.
• Direct Connection Terminal Mode: This mode
supports ASCII commands that are submitted from a
serial terminal. The command set has a limited
number of commands (including power control) and
supports raw IPMI commands that are entered as
hexadecimal ASCII characters.
Baud Rate
Sets the IPMI serial baud rate.
Flow Control Select a flow control value.
Channel Privilege Level
Limit
Select the IPMI privilege level for serial access.