38
FILE LOCATION: D:\Projects\Service Guide\Server\2011_Scorpion\RIS\BMC
Manual\BMC\C6220_BMC_HOM_section1.fm
Trap Settings
Select the Trap Settings submenu to view and manage the Simple Network
Management Protocol (SNMP) trap events.
Table 1-20. Trap Settings
Items Description
IPv4 Destination List
Enable Checkbox Enables or disables an IPv4 destination address. You can
enable up to four IPv4 destination addresses.
IPv4 Address Configure up to four IPv4 addresses.
Send Test Trap Button Use this button to send a test trap to a corresponding
email address.
IPv6 Destination List
Enable Checkbox Enables or disables an IPv6 destination address. You can
enable up to four IPv6 destination addresses.
IPv6 Address Configure up to four IPv6 addresses.
Send Test Trap Button Use this button to send a test trap to a corresponding
email address.
To Next Page
Loading...
