Dell PowerEdge C6220 - Page 55

55
FILE LOCATION: D:\Projects\Service Guide\Server\2011_Scorpion\RIS\BMC
Manual\BMC\C6220_BMC_HOM_section1.fm
Table 1-35. Chassis Device Commands (NETFUN: 00H)
Command NetFn CMD O/M Supported
Get Chassis Capabilities Chassis 00h M Yes
Get Chassis Status Chassis 01h M Yes
Chassis Control Chassis 02h M Yes
Chassis Reset Chassis 03h O No
Chassis Identify Chassis 04h O Yes
Set Chassis Capabilities Chassis 05h O Yes
Set Power Restore Policy Chassis 06h O Yes
Get System Restart Cause Chassis 07h O Yes
Set System Boot Options Chassis 08h O Yes
Get System Boot Options Chassis 09h O Yes
Set Front Panel Button Enable Chassis 0Ah O No
Set Power Cycle Interval Chassis 0Bh O Yes
Get POH Counter Chassis 0Fh O No
Table 1-36. PEF/PET Alerting Commands (NETFUN: 04H)
Command NetFn CMD O/M Supported
Get PEF Capabilities S/E 10h M Yes
Arm PEF Postpone Timer S/E 11h M Yes
Set PEF Configuration Parameters S/E 12h M Yes
Get PEF Configuration Parameters S/E 13h M Yes
Set Last Processed Event ID S/E 14h M Yes
Get Last Processed Event ID S/E 15h M Yes
Alert Immediate S/E 16h O Yes
PET Acknowledge S/E 17h O Yes