Dell PowerEdge C6220 - Using the System Setup Program; Start Menu; System Setup Options at Boot

58
FILE LOCATION: D:\Projects\Service Guide\Server\2011_Scorpion\RIS\BMC
Manual\BMC\C6220_BMC_HOM_section1.fm
Table 1-41. SDR Repository Commands (NETFUN: 0AH)
Command NetFn CMD O/M Supported
Get SDR Repository Info Storage 20h M Yes
Get SDR Repository Allocation Info Storage 21h O No
Reserve SDR Repository Storage 22h M Yes
Get SDR Storage 23h M Yes
Add SDR Storage 24h M No
Partial ADD SDR Storage 25h O Yes
Delete SDR Storage 26h O No
Clear SDR Repository Storage 27h M Yes
Get SDR Repository Time Storage 28h O Yes
Set SDR Repository Time Storage 29h O Yes
Enter SDR Repository Update Mode Storage 2Ah O No
Exit SDR Repository Update Mode Storage 2Bh O No
Run Initialization Agent Storage 2Ch O Yes
Table 1-42. LAN Commands (NETFUN: 0CH)
Command NetFn CMD O/M Supported
Set LAN Configuration Parameters
(Note: Parameter 9 and 25 are not
supported.)
Transport 01h M Yes
Get LAN Configuration Parameters
(Note: Parameter 9 and 25 are not
supported.)
Transport 02h M Yes
Suspend BMC ARP Transport 03h O No
Get IP/UDP/RMCP Statistics Transport 04h O No