EasyManua.ls Logo

Dell PowerEdge FX2 - Troubleshooting Enclosure Components; Troubleshooting a Wet Enclosure; Troubleshooting Power Supply Units

Dell PowerEdge FX2
91 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Enclosure control panel specifications
Externally
accessible
connectors
Specifications
USB One 4-pin, USB 1.1-compliant connector for keyboard and mouse support.
Video 15-pin VGA
I/O module specifications
NOTE: For information on the technical specifications for the I/O modules, see the I/O module documentation at
Dell.com/poweredgemanuals.
Environmental specifications
NOTE: For additional information about environmental measurements for specific system configurations, see Dell.com/
environmental_datasheets.
Temperature Specifications
Maximum
Temperature
Gradient
(Operating and
Storage)
20 °C/h (36 °F/h)
Storage
Temperature
Limits
–40 °C to 65 °C (–40 °F to 149 °F)
Relative
humidity
Specifications
Storage 5% to 95% RH with 33°C (91°F) maximum dew point. Atmosphere must be non-condensing at all times.
Temperature
(Continuous
Operation)
Specifications
Temperature
Ranges (for
altitude less than
950 m or 3117 ft)
10 °C to 35 °C (50 °F to 95 °F) with no direct sunlight on the equipment.
Humidity
Percentage
Range
10% to 80% Relative Humidity with 26 °C (78.8 °F) maximum dew point.
Maximum
vibration
Specifications
Operating 0.26 G
rms
at 5 Hz to 350 Hz (all operation orientations).
Storage 1.87 G
rms
at 10 Hz to 500 Hz for 15 min (all six sides tested).
Technical specifications—PowerEdge FX2/FX2s 87

Table of Contents

Other manuals for Dell PowerEdge FX2

Related product manuals