Dell PowerEdge R620 - Page 25

The default PERC for the R620 is a mini-type PERC. However, for a system with an internal GPU
card or a card between half-length and ¾-length, use the adapter-type PERC. The R620 also
supports the new software RAID solution that supports RAID 0, 1, 5 and 10. The R620 supports the
PERC cards listed in Table 15. For more information about the latest PERC offerings, see
Dell.com/PERC.
Controller
Description
Features
RAID
modes
supported
Form factor
Usage
model
PERC H810
External
Eight-port, external and
6Gp/s PCIe RAID controller
that supports up to 192
SATA and SAS hard drives
or SSDs
Includes 1GB NV DDR3
cache, premium
performance and feature
set, security SED/EKMS,
and SSD as cache
0, 1, 10, 5,
50, 6, 60
Adapter
Premium
performance
PERC H710P
Internal
Eight-port, internal 6Gb/s
PCIe RAID controller that
supports up to 32 SATA
and SAS hard drives or
SSDs
Includes 1GB NV DDR3
cache, premium
performance and feature
set, security SED/EKMS,
and SSD
0, 1, 10, 5,
50, 6, 60
Integrated
mini-type and
adapter-type
1
Premium
performance
PERC H710
Eight-port, internal 6Gb/s
PCIe RAID controller that
supports up to 32 SATA
and SAS hard drives or
SSDs
Includes 512MB DDR3
cache, advanced feature
set, security SED/EKMS,
and SSD as cache
0, 1, 10, 5,
50, 6, 60
Integrated
mini-type and
adapter-type
1
Performance
PERC H310
Eight-port, internal 6Gb/s
PCIe RAID that supports up
to 32 SATA and SAS hard
drives or SSDs
Supports hot-plug drives,
expansion, tape drives,
pass-thru
0, 1, 10, 5,
50
Integrated
mini-type and
adapter-type
1
Value
PERC S110
Software
RAID
3Gb/s SATA software RAID
controller that supports up
to 4 physical disks or 8
virtual disks
Supports hot-plug SATA
drives (4 drive
maximum); no
expansion; Microsoft
®
Windows
®
only
0, 1, 5, 10
Motherboard-
embedded
SATA
Entry-level
1
Adapter-type required with the two-PCIe slot chassis and required when configuring an internal GPU or ¾-length PCIe card