Dell PowerEdge R820 - Connecting the Power Cables; Securing the Power Cable(S)

Connecting The Power Cable(s)
Figure 3. Connecting the Power Cable(s)
Connect the system’s power cable(s) to the system and, if a monitor is used, connect the monitor’s power cable to the
monitor.
Securing The Power Cable(s)
Figure 4. Securing the Power Cable(s)
Bend the system power cable(s), as shown in the illustration, and attach to the cable strap. Plug the other end of the
power cable(s) into a grounded electrical outlet or a separate power source such as an uninterruptible power supply
(UPS) or a power distribution unit (PDU).
4