Dell PowerEdge T20 - Entering System Setup; Using The System Setup Navigation Keys; Updating The BIOS

Dell PowerEdge T20 Technical Guide 13
4 Memory
More options are available for the Dell PowerEdge 12th generation servers than in previous
generations — more capacity choices and more frequency choices. The PowerEdge T20 supports
up to 32GB of memory with speeds of up to 1600MT/s, providing high performance in a variety of
applications.
Supported memory
The T20 supports memory speeds of 1600MT/s and 1333MT/s, depending on the DIMM types
installed and the configuration. All memory on all processors and channels runs at the same speed
and voltage. By default, the system runs at the highest speed for the channel with the lowest DIMM
voltage and speed.
The T20 supports the DIMMs listed in Table 9. For the latest information on supported memory, visit
Dell.com/PowerEdge
.
Table 9. DIMMs supported
Capacity
Speed
Type
Ranks per
DIMM
2GB
1333/1600
MT/s UDIMM 1
2GB
1333/1600
MT/s UDIMM 1
4GB
1333/1600
MT/s UDIMM 1
4GB
1333/1600
MT/s UDIMM 1
4GB
1333/1600
MT/s UDIMM 2
8GB
1333/1600
MT/s UDIMM 2
8GB
1333/1600
MT/s UDIMM 1
8GB
1333/1600
MT/s UDIMM 2
16GB
1333/1600
MT/s UDIMM 2
16GB
1333/1600
MT/s UDIMM 2
32GB
1333/1600
MT/s UDIMM 2