Using the CLI 27
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Plasma\GSG\Plasma_UGUsing_CLI.fm
DELL CONFIDENTIAL – PRELIMINARY 3/6/13 - FOR PROOF ONLY
To download a boot image through the TFTP server:
1
Enter the
show version
command to verify which software version is
currently running on the device. The following is an example of the
information that appears:
2
Enter the
copy
{
tftp://
}
{tftp address}/{file name} boot
command to copy the boot image to the device. The following is an
example of the information that appears:
3
Enter the
reload
command. The following message is displayed:
4
Enter
Y.
The device reboots.
console# show version
SW version 1.0.0.17 ( date 05-Sep-2012 time 12:05:41 )
Boot version 1.0.0.2 ( date 22-Aug-2012 time 15:56:52 )
HW version
console# copy tftp://50.1.1.7/r2401-boot-1009.rfb boot
01-Oct-2006 11:57:35 %COPY-I-FILECPY: Files Copy - source URL
tftp://50.1.1.7/r2401-1009.rfb destination URL flash://boot
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
01-Sep-2010 11:57:38 %INIT-I-Startup: Cold Startup
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
01-Sep-2010 11:59:05 %COPY-N-: The copy operation was completed
successfully!
Copy: 522288 bytes copied in 00:01:30 [hh:mm:ss]
console# reload
This command will reset the whole system and disconnect your current
session. Do you want to continue (Y/N) [N]?
To Next Page
Loading...
