Figure 6. Cabling Two Hosts Using Redundant Data Paths (MD3000)
Nonredundant Configurations
Figure 7 through Figure 10 show one, two, three, and four hosts with each connected to only one RAID
controller module. The hosts can share storage space, but without redundant paths. If one path were to
fail, the server on that path would be disconnected from the storage array.
MD3000 RAID Enclosure
dual-HBA host server
dual-HBA host server
MD1000 Expansion Enclosure
MD1000 Expansion Enclosure
To Next Page
Loading...
