Need help?Do you have a question about the Dell PowerVault MD1400 and is the answer not in the manual?
General| HDD speed | 10000 RPM |
|---|---|
| RAID levels | 0, 1, 5, 6, 10, 50, 60 |
| Data transfer rate | 12 Gbit/s |
| Storage drive size | 2.5 \ |
| Storage drive capacity | 300 GB |
| Storage drive interface | Serial Attached SCSI (SAS) III |
| Storage drives installed | Yes |
| Installed storage drive type | HDD |
| Storage drive sizes supported | 3.5 \ |
| Supported storage drive types | HDD & SSD |
| Total installed storage capacity | 0.6 TB |
| Maximum supported storage capacity | 120 TB |
| Number of storage drives installed | 2 |
| Number of storage drives supported | 12 |
| Supported storage drive interfaces | SAS-2, SAS-3 |
| Chassis type | Rack (2U) |
| Product color | Black |
| Device class | Large Enterprise Business |
| AC input voltage | 120-230 V |
| AC input frequency | 50 - 60 Hz |
| Power supply unit (PSU) capacity | 600 W |
| Operating altitude | -16 - 3048 m |
| Non-operating altitude | -16 - 10600 m |
| Storage temperature (T-T) | -40 - 65 °C |
| Operating temperature (T-T) | 10 - 35 °C |
| Storage relative humidity (H-H) | 5 - 95 % |
| Operating relative humidity (H-H) | 8 - 85 % |
| Number of SAS host ports | 8 |
| Number of mini-SAS host ports | 4 |
| Cables included | AC |
| Controller interface type | SAS 6Gb/s |
| Harmonized System (HS) code | 84717020 |
Weight and Dimensions| Depth | 541 mm |
|---|---|
| Width | 482 mm |
| Height | 87 mm |
Details steps to attach and configure PowerVaults for NetWitness Platform 11.3+ and 11.2, for different deployment scenarios.
Guides connecting PowerVaults to RSA Series 5/6 Concentrator, Archiver, Decoder, or Log Decoder hosts, specifying port limits.
Explains connecting a single PowerVault to a Hybrid physical host, covering Series 5 and Series 6 configurations.
Provides steps to run the NwArrayConfig.py script for PowerVault installation on Decoder, Log Decoder, Concentrator, or Archiver.
Details running PowerVault installation scripts on hybrid hosts for NetWitness Platform 11.2 and earlier.
Details connecting PowerVaults to RSA Series 6 Archiver, Concentrator, or (Network) Decoder hosts for encryption.
Explains running installation scripts for PowerVaults with encryption on Archiver, Concentrator, or (Network) Decoder.
Guides connecting PowerVaults and DACs to RSA Series 5/6 hosts, detailing cable requirements.
Details running the external storage script for PowerVaults and DACs on Decoder, Log Decoder, or Archiver.
Guides connecting PowerVaults to RSA Series 5/6 hosts used as hybrids, specifying initial Concentrator PowerVault connection.
Details running PowerVault installation scripts on R603 or R640 hosts configured as hybrids.
To Next Page