Dell PowerVault MD1400 - Netwitness Platform 11.2 and Earlier

PowerVault (Dell MD1400) Setup Guide
NetWitness Platform 11.2 and Earlier
Deployment
Scenario
Tasks
Log Hybrid or
Network Hybrid
Running on
Core Appliance
1. Connect a Concentrator PowerVault (NW-PVHP56, NW-PVHP113, or
NW-PVHPE78) to an R630 or R640 the physical host before powering
on the physical host as described in Install PowerVault on Core Appliance
Used as a Hybrid.
2. Run the NwArrayConfig.py script as described in Run the PowerVault
Installation Scripts on an R603 or R640 Used as a Hybrid .
3. Restart the services for this host as described in Restart the Services.
4. License the services for this host (if they are not already licensed).
Refer to the Licensing Guide available through the application Help
option and RSA Link at https://community.rsa.com/docs/DOC-40370 for
instructions on licensing RSA physical hosts.
Install PowerVault on Core Appliance Used as a Hybrid 58