Dell PowerVault MD1400 - Capability with RSA Netwitness Platform Series 5 or 6 Hosts; Package Contents; Customer Supplied Materials

PowerVault (Dell MD1400) Setup Guide
Capability with RSA NetWitness Platform Series 5 or 6 Hosts
RSA NetWitness Platform Series 5 or 6 hosts are shipped with the software to support a
PowerVault installation. The initial setup of a PowerVault in your network involves these steps:
1. Review site requirements and safety information.
2. Install PowerVault.
Package Contents
Refer to the documentation that is included with the PowerVault. The Dell Storage MD1400
Enclosures Hardware Owner's Manual (http://topics-cdn.dell.com/pdf/storage-md1400-dsms_
owners-manual_en-us.pdf) contains detailed instruction on all the optional setups you can
implement with PowerVault to address the needs of your environment.
Note: The PowerVault comes with four SAS cables. You only need one cable to connect the
PowerVault to a Series 5 or 6 host. Use a cable with the mini-to-mini-SAS connectors to
connect the PowerVault to a Series 5 or 6 host.
Customer Supplied Materials
You do not need to supply any materials.
7 Hardware Description