PowerVault (Dell MD1400) Setup Guide
service <nwdecoder, nwarchiver, nwconcentrator start
2.
Make sure that the service comes back online and begins capture.
a. In the NetWitness Platform Services view (Administration > Services or ADMIN >
Services), verify that the service status is green.
b.
Select the service and then select > View > System.
c. If you see the Start Capture or Start Aggregation icon in the toolbar, click the icon to
start it.
Task 4 - (Conditional) License Host Services
License host services (if not already licensed). Refer to the Licensing Guide available through
the application Help option and RSA Link at https://community.rsa.com/docs/DOC-40370 for
instructions on licensing RSA hosts.
41 Install PowerVault with Encryption on a Series 6 R640 Host
To Next Page
Loading...
