Dell PowerVault MD1400 - Introduction; High-Level Procedure; Netwitness Platform 11.3 and Later

PowerVault (Dell MD1400) Setup Guide
Introduction
The following table contains the summarized installation instructions for different deployments,
and detailed procedures are in individual subsections. The deployment scenarios are:
l Multiple PowerVaults in a Concentrator, (Network) Decoder, Log Decoder, and Archiver
deployment.
l A single PowerVault in a Hybrid deployment.
High-Level Procedure
NetWitness Platform 11.3 and Later
Deployment
Scenario
Tasks
Log Hybrid or
Network Hybrid
Running on Core
Appliance
1. Connect a Concentrator PowerVault (NW-PVHP56, NW-PVHP113,
or NW-PVHPE78) to an R630 or R640 the physical host before
powering on the physical host as described in Install PowerVault on
Core Appliance Used as a Hybrid.
2. Follow the instructions in the Storage Guide for RSA NetWitness
Platform Version 11.3 and Later to allocate storage for your hardware.
57 Install PowerVault on Core Appliance Used as a Hybrid