Dell PowerVault MD1400 - Connect PowerVaults to Decoder;Archiver Hosts

PowerVault (Dell MD1400) Setup Guide
NetWitness Platform 11.2 and Earlier
Deployment
Scenario
Tasks
Concentrator,
Archiver, Decoder,
and Log Decoder
(Multiple Power-
Vaults)
1. Connect the PowerVaults to the physical host before powering on
the physical host as described in Connect PowerVaults to a
Concentrator, Archiver, Decoder, or Log Decoder Physical Host .
2. Run the NwArrayConfig.py script as described in Run the
PowerVault Installation Scripts on the Decoder, Log Decoder,
Concentrator, or Archiver .
3. Restart the services for this host as described in Restart the Service.
4. License the services for this host (if they are not already licensed).
Refer to the Licensing Guide available through the application Help
option and RSA Link at https://community.rsa.com/docs/DOC-40370
for instructions on licensing RSA physical hosts.
Hybrid
1. Connect the PowerVault to the physical host before powering on the
physical host as described in Connect a PowerVault to a Hybrid .
2. Run the NwArrayConfig.py script as described in Run the
PowerVault Installation Scripts on a Hybrid .
3. Restart the services for this host as described in Restart the Service.
4. License the services for this host (if they are not already licensed).
Refer to the Licensing Guide available through the application Help
option and RSA Link at https://community.rsa.com/docs/DOC-40370
for instructions on licensing RSA physical hosts.
Connect PowerVaults to a Concentrator, Archiver, Decoder, or Log
Decoder Physical Host
You can connect one or more PowerVaults to a RSA Series 5 or Series 6 Concentrator,
Archiver, Decoder, or Log Decoder physical hosts. You can only add four PowerVaults per port
for a total of eight PowerVaults per PERC H830 (Series 5) RAID controller or five per PERC
H840 (Series 6) RAID controller.
Install PowerVault without Encryption 12