Cabling Your Cluster Hardware 27
Connecting a PowerEdge Cluster to Multiple PowerVault MD3200i or
MD3220i Storage Systems
You can increase your cluster storage capacity by attaching multiple storage
systems to your cluster using redundant network switches. The PowerEdge
cluster systems support configurations with multiple PowerVault MD3200i or
MD3220i storage systems attached to clustered systems. In this scenario, the
Failover Cluster software can fail over disk drives in any cluster-attached
shared storage system between the cluster nodes.
book.book Page 27 Monday, June 21, 2010 1:45 PM
To Next Page
Loading...
