Dell PowerVault MD3600f Series - Supported Controller Firmware and NVSRAM; Supported SAS Host Bus Adapters; Supported Iscsi Software Initiators

5
SupportedControllerFirmwareandNVSRAM
NOTE: It is advisable to gather support information before performing any firmware upgrade. This can be
performed from the Support tab of the MD Storage Manager application.
NOTE: Only drivers and firmware released by Dell are supported. For the latest driver and firmware
releases, see the Downloads section at support.dell.com.
To determine your firmware and NVSRAM levels:
From a management station, connect to the storage array using MD Storage Manager.
Select the Support tab.
Click on Storage Array Profile and look for the firmware and NVSRAM versions.
Software
V
ersion
Controller Firmware (only MD32xx,
MD32xxi, and MD3600i series (SAS
& iSCSI)
07.75.14.62
Controller Firmware (only MD3600f
series (Fibre Channel))
07.75.20.62
Controller NVSRAM N26X0-770890-009
for MD3200 and MD3200i series
(SAS and iSCSI)
N26X0-770890-909
for MD3600i series (iSCSI only)
Controller NVSRAM N26X0-775890-009
for MD3600f series (Fibre Channel
only)
SupportedSASHostBusAdapters
Please see support.dell.com for the latest supported firmware and driver versions.
Host Bus Adapter Name
Dell 6Gbps SAS HBA
SupportediSCSISoftwareInitiators

Operating System SW Initiato
r
V
endo
r
SW Initiator Version Notes
Windows 2003 R2 SP2 Microsoft 2.08, 2.07 Available via MS download
Windows 2008 R2 SP2 Microsoft RTM or later Included w/OS
Windows 2008 SP2 Microsoft RTM or later Included w/OS
Red Hat Enterprise Linux Red Hat RTM or later Included w/OS
SUSE Linux Enterprise Server SUSE RTM or later Included w/OS
VMware ESX VMware RTM or later Included w/OS
Citrix XENserver Citrix RTM or later Included w/OS

