EasyManuals Logo

Dell PowerVault MD3600i Getting Started

Dell PowerVault MD3600i
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Getting Started With Your System
7
Preparing the Host Server
Supported Operating Systems
Microsoft Windows Server
Red Hat Enterprise Linux
SUSE Linux Enterprise Server
•VMware
NOTE:
For the latest information on all supported operating system versions,
see the Support Matrix at support.dell.com/manuals.
Additional NICs for iSCSI
When installing additional NICs, it is recommended that:
You use dedicated redundant storage networks for iSCSI traffic.
If a dedicated network is not feasible, isolate the iSCSI traffic from
general network traffic using virtual local area networks (VLAN).
You use additional NICs dedicated for iSCSI traffic.
The NICs must be added in pairs for redundancy.
NOTE:
A single NIC is also supported.
NIC Configuration
In a SAN environment, depending on the number of switches, it is
recommended that you use two unique subnets for iSCSI traffic.
For direct-attached storage environments, each NIC directly connected to
the PowerVault MD36xxi must be on a separate subnet. All host IP addresses
must be configured before installing the MD storage software.

Table of Contents

Other manuals for Dell PowerVault MD3600i

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell PowerVault MD3600i and is the answer not in the manual?

Dell PowerVault MD3600i Specifications

General IconGeneral
BrandDell
ModelPowerVault MD3600i
CategoryStorage
LanguageEnglish

Related product manuals