58 Preparing Your Systems for Clustering
use the storage array profile as an aid during recovery or as an overview of the
current configuration of the storage array. Create a new copy of the storage
array profile if your configuration changes.
1
To open the storage array profile in the
Array Management
window,
perform one of the following actions:
• Select
Storage Array
View
Profile
.
• Select the
Summary
tab and click
Storage Array Profile
in the
Status
area.
• Select the
Support
tab and click
View Storage Array Profile
.
The
Storage Array Profile
screen is displayed. The
Storage Array Profile
screen contains several tabs, and the title of each tab corresponds to the
subject of the information contained.
2
Perform one of these actions in the
Storage Array Profile
screen:
• View detailed information (Go to step 3).
• Search the storage array profile (Go to step 4).
• Save the storage array profile (Go to step 5).
• Close the storage array profile (Go to step 6).
3
Select one of the tabs, and use the horizontal scroll bar and the vertical
scroll bar to view the storage array profile information. You can use other
steps in this procedure to search the storage array profile, to save the
storage array profile, or to close the storage array profile.
4
To search the storage array profile:
a
Click
Find
.
b
In the
Find
text box, type the term that you want to search. If the
term is located on the current tab, it is highlighted in the storage array
profile information.
NOTE: The search is limited to the current tab. If you want to search for the
term in other tabs, select the tab and click Find again.
c
Click
Find
again to search for additional occurrences of the term.
5
To save the storage array profile:
a
Click
Save As
.
b
To save all sections of the storage array profile, select
All Sections
.
book.book Page 58 Monday, July 25, 2011 3:18 PM
To Next Page
Loading...
