Dell Precision T1700 - I;O Panel Service

3. Install the:
a) drive cage
b) optical drive
c) front bezel
d) cover
4. Follow the procedures in After Working Inside Your Computer .
Removing the Input/Output (I/O) Panel
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the:
a) cover
b) front bezel
c) optical drive
d) drive cage
3. Disconnect and un-thread the I/O panel/ FlyWire cable from the fan-shelter clip and heat sink.
4. Remove the screw that secures the I/O panel to the chassis. Then, slide the I/O panel to the right to release and
remove from the computer.
22