Installing the System Board
1. Align the system board to the port connectors on the rear of the chassis and place the system board in the chassis.
2. Tighten the screws that secure the system board to the chassis.
3. Connect the cables to the system board.
4. Install:
a) processor
b) memory module(s)
c) heat-sink fan
d) heat sink
e) speakers
f) front input/output (I/O) panel
g) PCI card
h) PSU card
i) system fan
j) hard drive
k) thermal sensor
l) coin-cell battery
m) optical drive
n) cover
o) PSU
5. Follow the procedures in
After Working Inside Your Computer
.
System Board Components
The following image displays the system board components.
35
To Next Page
Loading...
