To Next PageTo Next Page
Need help?Do you have a question about the Dell Precision WorkStation 420 and is the answer not in the manual?
General| Form Factor | Mini-Tower |
|---|---|
| Network | 10/100 Ethernet |
| Power Supply | 250W |
| Processor | Intel Pentium III or Xeon |
| Processor Speed | Up to 1 GHz |
| Memory Type | SDRAM |
| Storage | SCSI or IDE |
| Graphics | NVIDIA Quadro or ATI FireGL |
| AGP | AGP 4x |
| Operating System | Windows 2000 |
| Expansion Slots | 1 AGP |
| Ports | Serial, Parallel, USB |
| Optical Drive | CD-ROM or DVD-ROM |
| Dimensions | 17.5 x 8.25 x 17.5 inches |
| Weight | 40 lbs |
General introduction to the desktop chassis procedures and system requirements.
List of tools required for performing maintenance on the desktop chassis.
Essential safety guidelines and ESD precautions for working on the desktop chassis.
Steps to restart the system and reset the chassis intrusion detector after service.
Detailed procedure for removing and reinstalling the desktop computer cover.
Location and purpose of the interior service label for desktop systems.
Diagram illustrating the internal layout of the desktop chassis.
Procedure for removing and replacing front-panel inserts on the desktop chassis.
Description of expansion slots and card types available in the desktop system.
Step-by-step guide for removing expansion cards from the desktop system.
Procedure for removing the expansion card guide from the desktop chassis.
Steps to remove the front control panel assembly from the desktop chassis.
Procedure for removing and replacing the chassis intrusion switch.
Overview of the drive bay configurations in the desktop chassis.
Detailed instructions for removing the 3.5-inch diskette drive.
Procedures for removing optical, tape, or other 5.25-inch drives.
Steps to remove the mounting bracket for the hard disk drive.
Detailed instructions for removing a hard disk drive from its bracket.
Guide for installing a new hard disk drive into the desktop chassis.
Introduction to the power supply unit and its accessibility.
Method to rotate the power supply for easier access to internal components.
Diagram identifying sockets and connectors on the system board.
Explanation and settings for system board configuration jumpers.
List of system board connector and socket labels with descriptions.
Instructions for removing and installing Rambus in-line memory modules (RIMMs).
Procedure for replacing the microprocessor and its heat sink assembly.
Steps to remove the system cooling fan from the desktop chassis.
Guide for removing and installing the system battery.
Detailed steps for removing and reinstalling the system board.
General introduction to the mini tower chassis procedures and system requirements.
List of tools required for performing maintenance on the mini tower chassis.
Essential safety guidelines and ESD precautions for working on the mini tower chassis.
Steps to restart the system and reset the chassis intrusion detector after service.
Detailed procedure for removing and reinstalling the mini tower computer cover.
Location and purpose of the interior service label for mini tower systems.
Diagram illustrating the internal layout of the mini tower chassis.
Procedure to remove the front panel from the mini tower chassis.
Procedure for removing and replacing front-panel inserts on the mini tower.
Overview of the drive bay configurations in the mini tower chassis.
Detailed instructions for removing the 3.5-inch diskette drive in mini tower.
Procedures for removing optical, tape, or other 5.25-inch drives in mini tower.
Steps to remove a hard disk drive from the mini tower chassis.
Guide for installing a hard disk drive into the mini tower chassis.
Procedure for removing the AGP card brace in the mini tower system.
Description of expansion slots and card types available in the mini tower system.
Step-by-step guide for removing expansion cards from the mini tower.
Guide for installing expansion cards into the mini tower system.
Procedure for removing the expansion card guide and attached fan.
Steps to remove the front control panel assembly from the mini tower chassis.
Procedure for removing and replacing the chassis intrusion switch in mini tower.
Introduction to the power supply unit and its accessibility in mini tower.
Method to rotate the power supply for easier access to internal components in mini tower.
Diagram identifying sockets and connectors on the mini tower system board.
Explanation and settings for system board configuration jumpers in mini tower.
List of system board connector and socket labels with descriptions for mini tower.
Instructions for removing and installing Rambus in-line memory modules (RIMMs).
Procedure for replacing the microprocessor and its heat sink assembly.
Steps to remove the microprocessor cooling fan from the mini tower.
Guide for removing and installing the system battery in the mini tower.
Detailed steps for removing and reinstalling the system board in the mini tower.
