Troubleshooting Your Projector 45
8
Replace the lamp cover and tighten the one screw.
9
Reset the lamp usage time by selecting "Yes" for
Lamp Reset
in the OSD
Power Settings
of the
Advanced Settings
menu (see Power Settings of
the Advanced Settings menu on page 37). When a new lamp module has
been changed, the projector will automatically detect and reset the lamp
hours.
CAUTION: Lamp Disposal (for the US only)
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST
BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE,
OR FEDERAL LAWS. FOR MORE INFORMATION, GO TO
WWW.DELL.COM/HG OR CONTACT THE ELECTRONIC INDUSTRIES
ALLIANCE AT WWW.EIAE.ORG. FOR LAMP-SPECIFIC DISPOSAL
INFORMATION, CHECK WWW.LAMPRECYCLE.ORG.
To Next Page
Loading...
