Setting Up the Monitor | 13
Organizing Cables
After you connect all necessary cables to your monitor and computer, organize all
cables as shown above.
NOTE: After the cables are connected, they will have to be disconnected again
to route them through the hole.
Removing the Monitor Stand
NOTE: To prevent scratches on the LCD screen while removing the stand,
ensure that the monitor is placed on a soft and clean surface.
NOTE: The following steps is applicable for a monitor with a stand.
2
3
22
3
2
2
To remove the stand:
1.
Place the monitor on a soft cloth or cushion.
2.
Use a long and thin screwdriver to push the release latch.
3.
Once the latch is released, remove the base away from monitor.
To Next Page
Loading...
