Dell S2440L - Setting Up Your Monitor; Attaching the Stand

Back to Contents Page
Setting Up the Monitor
Dell™ S2440L Monitor User's Guide
Attaching the Stand
Connecting the Monitor
Organizing Your Cables
Removing the Monitor Stand
Attaching the Stand
NOTE: The stand riser and stand base are detached when the monitor is shipped from the factory.
1. Assemble the stand riser to stand base.
a. Attach the stand riser to the stand base.
b. Tighten the thumbscrew below the stand base.
2. Attach the stand assembly to the monitor.
a. Place the monitor on a soft cloth or cushion near the edge of desk.
b. Align the stand assembly bracket to the monitor groove.
c. Insert the bracket towards monitor until it locked in place.