Need help?Do you have a question about the Dell UltraSharp WB7022 and is the answer not in the manual?
General| Megapixel | 8.3 MP |
|---|---|
| Digital zoom | 5 x |
| Face tracking | - |
| Camera HD type | Full HD |
| Zoom capability | Yes |
| Maximum frame rate | 60 fps |
| Maximum video resolution | 3840 x 2160 pixels |
| Interface | USB |
| Sensor type | CMOS |
| Mounting type | Clip |
| Product color | Black |
| Housing material | Aluminum |
| Built-in microphone | No |
| Harmonized System (HS) code | 85258900 |
Weight and Dimensions| Depth | 90 mm |
|---|---|
| Width | 42 mm |
Allows changing FOV from 65 to 90 degrees based on user preference for personalized video output.
Automatically frames the user within 2 meters for optimal focus, ensuring the user stays centered.
Provides superior picture quality in extreme lighting and reduces grainy images in low light conditions.
Application to manage and set up Dell Peripherals, offering device setting changes and additional customization.
Software is downloaded and installed automatically via Windows Update when the device is first connected.
Recommends Windows 10 64-bit/macOS X 10.7+ and a USB 3.0 port for installation.
Explains Windows Hello authentication using facial recognition with the Dell WB7022 webcam.
Detects presence, triggers Windows Hello, and wakes computer from sleep.
USB 3.0 is required for 4K video; USB 2.0 may cause lower quality and authentication issues.
Explains status-LED behavior for camera usage and Windows Hello authentication.
Steps to enable external webcam for Windows Hello facial recognition via Dell Peripheral Manager.
Confirms webcam compatibility with docking stations and USB hubs.
Explains Wake on Approach triggers only via Walk Away Lock, not manual sleep.
General recommended steps to resolve common webcam issues, including software and driver updates.
Steps to resolve issues where the webcam is not detected by the system.
Troubleshooting steps to enable 4K resolution in camera settings, checking USB port and cable.
Explains why Walk Away Lock and Wake on Approach features might not work on certain systems.
Guidance to resolve image flickering caused by LED or fluorescent light interference using anti-flicker settings.
Information on proximity detection feature support on non-Dell computers and driver updates.
Notes that Dell Peripheral Manager is not supported on ARM-based Windows computers.
Troubleshooting steps for webcam connectivity issues with Dell Peripheral Manager and Camera app.
Steps to resolve webcam detection issues when connected via a docking station or USB hub.
Explains that auto-framing does not support 60 FPS at 4K and requires 24 or 30 FPS.
To Next Page
