Removing and installing components
NOTE: The images in this document may differ from your computer depending on the configuration you ordered.
Topics:
• Recommended tools
• Screw list
• Major components of Vostro 14 5415
• Base cover
• Battery
• Memory module
• Solid-state drive
• Wireless card
• Fan
• Coin-cell battery
• Heat sink
• Network-port bracket
• I/O board
• Speakers
• Touchpad
• Display assembly
• Power button with optional fingerprint reader
• Power-adapter port
• System board
• Palm-rest and keyboard assembly
Recommended tools
The procedures in this document may require the following tools:
● Phillips screwdriver #0
● Phillips screwdriver #1
● Plastic scribe
Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surface when
replacing a component.
NOTE: Screw color may vary with the configuration ordered.
2
10 Removing and installing components
To Next Page
Loading...
