1. Connect the camera/microphone cable to the connector on the camera/microphone assembly.
2. Position the camera/microphone in the top cover and replace the M2 x 3- mm screw that secures the
camera/microphone assembly to the top cover.
3. Replace the display bezel (see Replacing the Display Bezel).
4. Replace the display assembly (see Replacing the Display Assembly
).
5. Replace the keyboard (see Replacing the Keyboard
).
6. Replace the hinge cover (see Replacing the Hinge Cover
).
7. Reconnect the antenna to the WLAN card (see Replacing a WLAN Card
).
Back to Contents Page
To Next Page
Loading...
