11. Disconnect the multimedia-button pad connector from the system board.
12. Disconnect the touch pad connector from the system board.
13. Disconnect the fingerprint reader connector from the system board.
NOTICE: Do not use force to separate the palm rest from the computer. If you encounter resistance, gently
flex or apply pressure to the palm rest, or move along the edge, working away from the area of resistance,
until the palm rest is free.
14. Moving from left to right, carefully lift the palm rest along the rear edge, near the hinge brackets, and gently lift the
palm rest.
1 multimedia panel connector 2 computer base
3 palm rest 4 fingerprint reader connector
5 touch pad connector
To Next Page
Loading...
