1. Align the guide holds in the speaker assembly with the guide posts on the base of the computer, then lower the
assembly into place.
2. Replace the two M2.0 x 3-mm screws to secure the speaker assembly
3. Replace the palm rest (see Replacing the Palm Rest
).
4. Replace the display assembly (see Replacing the Display Assembly
).
5. Replace the keyboard (see Replacing the Keyboard
).
6. Replace the hinge cover (see Replacing the Hinge Cover
).
7. Replace the WLAN card (see Replacing a WLAN Card
).
8. Replace the hard-drive cover. See Removing the Hard Drive
for an illustration of the hard drive cover.
Back to Contents Page
To Next Page
Loading...
