Dell Vostro 1710 - Replacing the USB Daughter Card

CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your
computer.
This procedure assumes that you have completed the removal procedure Removing the USB Daughter Card
.
1. Replace the M2.5 x 5-mm screw to secure the daughter card to the computer base.
2. Connect the daughter card connector to the daughter card.
3. Replace the palm rest (see Replacing the Palm Rest
).
4. Replace the display assembly (see Replacing the Display Assembly
).
5. Replace the keyboard (see Replacing the Keyboard
).
6. Replace the hinge cover (see Replacing the Hinge Cover
).
7. Replace the WLAN card (see Replacing a WLAN Card
).
8. Replace the hard drive cover. See Removing the Hard Drive
for an illustration of the hard drive cover.
Back to Contents Page