Dell Vostro 1710 - Replacing the Coin-Cell Battery

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that
shipped with your computer.
This procedure assumes that you have completed the removal procedure Removing the Coin-Cell Battery.
1. Connect the coin-cell battery cable to the system board.
2. Position the coin-cell battery on the system board.
3. Replace the system board (see Replacing the System Board Assembly
).
4. Replace the optical drive (see Replacing the Optical Drive
).
5. Replace the palm rest (see Replacing the Palm Rest
).
6. Replace the display assembly (see Replacing the Display Assembly
).
7. Replace the keyboard (see Replacing the Keyboard
).
8. Replace the hinge cover (see Replacing the Hinge Cover
).
9. Replace the fan (see Replacing the Fan
).
10. Replace the WLAN card (see Replacing a WLAN Card
).
11. Replace the hard drive (see Replacing the Hard Drive
).
Back to Contents Page