Dell Vostro 230 - System Setup - Security and Boot; Resume and Security Settings; Boot Sequence Configuration

Back to Contents Page
Devices
l Enabled (default)
l Disabled
Resume on LAN
Allows the system to resume from an onboard LAN, PCIE-X1 LAN card, or a PCI LAN card. Available settings are:
l Enabled
l Disabled (default)
Resume on RTC
Alarm
You can set the alarm to enabled and key in Data/time to power on system Available settings are:
l Enabled
l Disabled (default)
Security
Supervisor
Password
Provides restricted access to the computer's system setup program in the same way that access to the system can be restricted with the
System Password option.
This option is not set by default.
Boot
Boot Sequence
Specifies the Boot Device Priority sequence from available devices.