Installing the Battery
1. Slide the battery into its slot until it clicks into place.
2. Follow the procedures in
After Working Inside Your Computer
.
Removing the Secure Digital (SD) Card
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Press in on the SD memory card to release it from the computer.
3. Slide the memory card out of the computer.
Installing the Secure Digital (SD) Card
1. Push the memory card into the compartment until it clicks into place.
2. Follow the procedures in
After Working Inside Your Computer
.
Removing the Hinge Cover
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the battery.
3. Remove the screw that secures the hinge cover.
10
To Next Page
Loading...
