Dell Vostro 2520 - Installing the Camera; Removing the Display Panel

Installing the Camera
1. Insert and align the camera module to its compartment.
2. Connect the camera cable to the camera module.
3. Install the display bezel.
4. Install the battery.
5. Follow the procedures in After Working Inside Your Computer .
Removing the Display Panel
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove:
a) battery
b) hinge cover
c) keyboard
d) palmrest
e) display assembly
f) display bezel
3. Disconnect the camera cable from the camera module.
4. Remove the screws that secure the display brackets and hinges.
35