Dell Vostro 3020 - Page 58

Table 3. System setup options—System information menu (continued)
Overview
DIMM 1 Size Displays the DIMM 1 memory size.
DIMM 2 Size Displays the DIMM 2 memory size.
DEVICES
Video Controller Displays the video controller type of the computer.
Video Memory Displays the video memory information of the computer.
Wi-Fi Device Displays the wireless device information of the computer.
Native Resolution Displays the native resolution of the computer.
Video BIOS Version Displays the video BIOS version of the computer.
Audio Controller Displays the audio controller information of the computer.
Bluetooth Device Displays the Bluetooth device information of the computer.
LOM MAC Address Displays the LOM MAC address of the computer.
Slot 2 Displays the status of the expansion slot (Slot 2) of the computer.
Slot 3 Displays the status of the expansion slot (Slot 3) of the computer.
Table 4. System setup options—Boot Configuration menu
Boot Configuration
Boot Sequence
Boot Mode: UEFI only Displays the boot mode of this computer.
Boot Sequence Specifies the order that the BIOS searches the list of devices to find an
operating system to boot.
By default, UEFI Hard Drive 2 is selected
By default, Windows Boot Manager is selected
By default, UEFI Hard Drive is selected
By default, ONBOARD NIC (IPV4) is selected
By default, ONBOARD NIC (IPV6) is selected
By default, UEFI HTTPS Boost is selected
Secure Boot
Enable Secure Boot Enables secure boot using only validated boot software.
Default: OFF
Secure Boot Mode Modifies the behavior of Secure Boot to allow evaluation or enforcement of
UEFI driver signatures. Deployed Mode should be selected for normal operation
of Secure Boot.
By default, Deployed Mode is selected.
Expert Key Management
Enable Custom Mode Allows the PK, KEK, db, and dbx security key databases to be modified.
Default: OFF
NOTE: If Custom Mode is not enabled, any changes that are made with
respect to the keys will not be saved.
Custom Mode Key Management Allows for selection of key database.
● Save to File will save the key to a user-selected file.
● Replace from File will replace the current key with a key from a user-
selected file.
58 BIOS setup