Table 13. System setup optionsāSystem Management menu (continued)
System Management
Set Ownership Date Enables you to set ownership date.
By default, the option is disabled.
Intel AMT Capability
Enable Intel AMT Capability Enable or disable the Intel Active Management Technology capability.
By default, the option Restrict Preboot Accessis enabled.
Diagnostics
OS Agent Requests Enables Dell OS Agent to schedule onboard diagnostics on a subsequent boot.
By default, the option is enabled.
Power-on Self-Test Autonomic
Recovery
Enable or disable Power-on Self-Test Autonomic Recovery feature.
By default, the option is enabled.
Table 14. System setup optionsāKeyboard menu
Keyboard
Numlock Enable Enable or disable the Numlock function when the system boots.
By default, the option is enabled.
Fn Lock Options By default, the Fn lock option is enabled.
Keyboard Illumination Enables to change the keyboard illumination settings.
By default, the option Bright is selected.
Keyboard Backlight Timeout on AC Set the timeout value for the keyboard backlight when an AC adapter is
connected to the system.
By default, the 10 seconds option is enabled.
Keyboard Backlight Timeout on
Battery
Set the timeout value for the keyboard backlight when the is running only on
battery power.
By default, the 10 seconds option is enabled.
Device Configuration Hotkey Access Manages whether you can access device configuration screens through
hotkeys during system startup.
By default, the option is enabled.
Table 15. System setup optionsāPre-boot Behavior menu
Pre-boot Behavior
Adapter Warnings
Enable Adapter Warnings Enable or disable the warning messages during boot when the adapters with
less power capacity are detected.
By default, the option is enabled.
Warning and Errors Enable or disable the action to be done when a warning or error is encountered.
By default, the Prompt on Warnings and Errors option is enabled.
USB-C Warnings Enable or disable dock warning messages
By default, the option is enabled.
Fastboot Enable to set the speed of the boot process.
By default, the Thorugh option is enabled.
66 System setup
To Next Page
Loading...
