Replacing Memory Module(s): Dell XPS 430 Service Manual
memory.htm[4/15/2014 11:28:28 AM]
6. Align the notch on the bottom of the module with the tab in the connector.
1 cutouts (2) 2 memory module
3 notch 4 tab
NOTICE: To avoid damage to the memory module, press the module straight down into the connector while you apply
equal force to each end of the module.
7. Insert the module into the connector until the module snaps into position.
If you insert the module correctly, the securing clips snap into the cutouts at each end of the module.
8. Replace the computer cover (see Replacing the Computer Cover).
9. Connect your computer and devices to electrical outlets, and then turn them on.
10. If a message appears stating that memory size has changed, press <F1> to continue.
11. Log on to your computer.
To Next Page
Loading...
