Adding and Replacing Parts 135
If you ordered a card with Bluetooth wireless technology with your computer, it is already installed.
NOTICE: To help prevent damage to the system board, you must remove the main battery from the battery bay
before you begin working inside the computer.
1
Follow the procedures in "Before You Begin" on page 113.
2
Remove the card screw.
3
Using your fingers or a plastic scribe, carefully pull the card out of the compartment so that you can
disconnect the card from its cable and remove it from the computer.
4
To replace the card, connect the card to the cable and then carefully insert the card into the
compartment.
5
Replace the card screw.
1 card screw 2 internal card with Bluetooth
wireless technology
3 card connector
1
2
3
To Next Page
Loading...
