22
Instruction Manual
Operation Instructions
Water Drainage
Drain Area
Bottom Drain Outlet
• When the internal water tank is full the digital display will show “FL” error code.
• Carefully move the air conditioner to a drain location, then remove the bottom drain plug and drain
the water.
• After draining, re-install the drain plug and restart the air conditioner.
• For continue drainage during dry mode, remove the upper drain plug and insert a drain hose to the
outlet.
• Place the other end of the hose to a drain area.
Upper Drain Outlet
Attention
• Do not submerge the end of the hose into water to prevent air lock.
To Next Page
Loading...
