What to do if my Delmarva 2000 DE-2L unit will not come on?
If the Delmarva Medical Equipment unit doesn't turn on (no lights), check the power cord connection at both the outlet and the unit, and plug them in firmly. Try a different outlet or fix the faulty outlet. If the problem persists, it may indicate an internal failure.
Why does my Delmarva Medical Equipment scaler handpiece gets hot?
If the scaler handpiece gets hot, it could be due to insufficient water flow. Try setting the water knob higher. Also, the power setting might be too high. Check for air in the water system. A broken insert lamination can also cause overheating, consider replacing the insert.
What to do if my Delmarva 2000 DE-2L shows 'Low Pressure' light with some water flow?
If the 'Low Pressure' light is on but some water flows, the water knob may be set too low; adjust it higher. There might also be a clog or restriction; check the filter.
Why does my Delmarva 2000 DE-2L Medical Equipment insert pops out of handpiece?
If the insert pops out of the handpiece, it is likely due to a worn or faulty 'O' ring. Replace the insert.
What to do if my Delmarva 2000 DE-2L Medical Equipment unit shows 'Low Pressure' light and no water flows?
If the 'Low Pressure' light is on and no water flows, the water supply may be off, or the DE-4 tank is empty or has no pressure. Turn on the supply, fill, and pump up the tank. There could also be a clog; clear the clog.
Why does my Delmarva 2000 DE-2L have poor ultrasonic vibration?
If there is poor ultrasonic vibration, the power may be set too low; increase the setting. Ensure the insert is fully seated. The insert may also be bent or worn out, so replace it.
What to do if my Delmarva 2000 DE-2L has no scaler action, no water flow, but lights are lit?
If there is no scaler action and no water flow, but the lights are lit, the foot pedal may be faulty.
What to do if my Delmarva Medical Equipment has no water flow when using portable water supply?
If there is no water flow when using a portable water supply, check for no or low pressure in the tank and pump up to normal. Also, check for no or low water in the tank and refill and pump up. The filter or insert might be clogged.
Why does my Delmarva Medical Equipment make a screeching noise during scaling?
If there is a screeching noise during scaling, there might be air in the water system.
Why does my Delmarva 2000 DE-2L Medical Equipment have poor scale removal even when the tip seems to cavitate OK?
If there is poor scale removal even when the tip seems to cavitate OK, it could be due to improper technique. The wrong tip for the task might also be the cause, so select the correct insert. A worn-out tip can also lead to poor scale removal, so replace the insert.
Details on power, water, frequency, and motion of the scaler.
Information on temperature, dimensions, weight, and protection class.
Critical warnings on sterilization, water, power, and tip usage.
Cautions regarding operation without lavage, autoclaving, and handling.
Safety advice for users with pacemakers or implanted electronic devices.
Procedure to verify all package contents are present and undamaged.
Instructions for connecting the unit to a water source.
Guidance on connecting the unit to power and attaching the handpiece.
Explanation of how to adjust the power output and settings.
Instructions for adjusting water flow and understanding the low pressure light.
Proper technique for scaling, tip usage, and power settings.
Critical role of lavage in cooling the insert and preventing damage.
Information on insert wear and its impact on performance.
Correct methods for autoclaving scaler magnetostrictive inserts.
How to properly clean and disinfect the scaler handpiece.
Steps to purge air from the water system before use.
Guidance on checking scaler inserts for wear and damage.
Essential dos and don'ts for cleaning and maintaining inserts.
Recommendations for power settings based on the type of insert used.
Instructions on how to measure insert wear using provided illustrations.
Resolving problems related to the unit not powering on or lack of water flow.
Troubleshooting issues with scaler action, handpiece heat, or vibration.
Addressing situations where the 'Low Pressure' light is active.
Description of the optional portable water supply tank.
Instructions for filling, operating, and cleaning the DE-4 tank.
List of available accessories for the veterinary scaler unit.
Information on warranty periods for the unit and its components.
Requirements for warranty validation and conditions that may void it.
Instructions for shipping equipment for warranty repairs.
Instructions for shipping equipment for non-warranty repairs.
General| Brand | Delmarva |
|---|---|
| Model | 2000 DE-2L |
| Category | Medical Equipment |
| Language | English |
To Next Page