PARTS & ASSEMBLY
A. Control panel
Ensure all packaging materials, protective film and adhesive tape are
removed and check the oven and door for any damage. Do not
remove the waveguide cover.
Assemble as shown above and ensure that the glass turntable is
correctly positioned on the roller.
G. Waveguide cover
F. Interlocking catches
E. Seal
D. Door with viewing panel
C. Glass turntable
B. Turntable roller
When using in microwave only mode do not fit the grill rack.
When using the grill, place the grill rack onto the glass turntable.
When using the combination and convection modes the grill rack may
be used as required.
A
B
C
D
E
F
G
Version 1 30/11/2021
Grill Rack (Note: Do not use in
microwave function and must be
placed on the glass turntable)
To Next Page
Loading...
