To Next PageTo Next PageWhat to do if DeLonghi AN Air Conditioner doesn't cool the room?
If your DeLonghi Air Conditioner is running but not cooling the room, the window might be open, the exhaust hose might be detached, or the air filter could be clogged. Try closing the window, connecting the exhaust hose, and cleaning or replacing the filter.
How to fix DeLonghi Air Conditioner that does not start?
If your DeLonghi Air Conditioner doesn't start, it could be due to no electricity, not being plugged into the electrical receptacle, or a tripped safety device in the plug. Wait for the electricity to come back on, ensure the unit is plugged into the electrical receptacle, and reset the safety device. If the problem persists after these steps, contact customer service.
Why does my DeLonghi AN Air Conditioner work for only a short time?
If your DeLonghi Air Conditioner operates only briefly, it might be due to a constriction or blockage in the air exhaust hose, or tight bends in the hose. Ensure the exhaust hose is correctly positioned, check for any obstacles obstructing the air discharge, and eliminate any tight bends in the hose.
Why is my DeLonghi AN not cooling?
If your DeLonghi Air Conditioner isn't cooling the room, there might be several reasons: * Ensure all doors, windows, and curtains are closed. * Eliminate any heat sources like ovens or hair dryers. * Make sure the air exhaust hose is correctly fitted to the housing at the back of the unit. * Clean or replace the dust filters.
How to fix DeLonghi AN Air Conditioner that won't turn on?
If your DeLonghi Air Conditioner doesn't turn on, make sure it is plugged into the outlet. If it is plugged in, and there is a power outage, wait at least 3 minutes and try again. If it still doesn't turn on, the internal safety device may have tripped; in this case, call the Customer Service Center.
Why DeLonghi Air Conditioner does not operate for 3 minutes after turning it on?
Your DeLonghi Air Conditioner may not operate immediately after being turned on because the safety device has tripped. Please wait for three minutes.
Why does the alarm light come on my DeLonghi AN?
The alarm light on your DeLonghi Air Conditioner indicates that the tank inside the appliance is full. You should empty the tank.
Why does my DeLonghi AN smell unpleasant?
An unpleasant smell from your DeLonghi Air Conditioner is likely due to a clogged air purifying filter. Clean or replace the filters to resolve this issue.
What to do if my DeLonghi Air Conditioner works for a short time only?
If your DeLonghi Air Conditioner works only for a short time, check the air exhaust hose for bends or kinks. Position the hose correctly, keeping it as short and free of curves as possible. Also, check for and remove any obstacles preventing air from being discharged.
Why does my DeLonghi Air Conditioner smell bad?
If there is an unpleasant smell in the room during operation of your DeLonghi Air Conditioner, the dust filter and electrostatic filter might be clogged. Clean the filters as described above.
General| Brand | DeLonghi |
|---|---|
| Model | AN Series |
| Category | Air Conditioner |
| Language | English |
Specifies the voltage and frequency requirements for the appliance.
Covers intended domestic use, installation compliance, and safety precautions.
Lists critical safety rules for electrical shock, water, and handling.
Information on packaging recycling, R32 gas safety, and storage.
Emphasizes reading instructions and checking appliance condition before operation.
Instructions for connecting the exhaust hose and adapter for installation.
Steps for drilling holes and preparing mounting for wall installation.
Procedures for fitting the window bracket for different window types.
Specific steps for installing the exhaust hose in casement windows.
Detailed explanation of each button and symbol on the control panel.
Instructions for turning the appliance on, off, and its standby mode.
Explanation of Real Feel and how to operate in Air Conditioning mode.
How to select fan speed, Arctic Whisper, Dehumidifying, and Fan modes.
Changing temperature units and programming delayed start/stop times.
How to use the remote, its range, and battery instructions.
How to turn the appliance on/off using the remote control.
Explains common error codes displayed by the appliance and their meanings.
Provides guidance on actions for each displayed error code.
Recommendations for efficient operation, like closing windows and managing sunlight.
Instructions for cleaning the appliance cabinet and the air filter.
Procedures for initial checks and end-of-season storage.
Information on unit handling, transport, electrical connections, and safety plug.
Solutions for issues like no power, short operation, or poor cooling.
Addresses smells, restart delays, and error code troubleshooting.
