DeLonghi CGH1112D - Appliance Power and Function Issues

30
Temperature probe
malfunction.
The electronic control
has detected a
temperature probe
malfunction.
Note the error word.
Unplug from
wall outlet. The
temperature probe
needs to be replaced.
Contact De’Longhi
Customer Service
reporting the error
type.
The appliance does not
come on.
Check the appliance is
correctly plugged into
the wall outlet.
Plug the appliance
into a dierent outlet.
Verify the circuit
breaker.
If this does not
resolve the problem,
the appliance
has probably
malfunctioned.
Contact De’Longhi
Customer Service.
The appliance does
not come on after
pressing the START/
STOP button.
Both temperature
knobs are in the "●"
position and the up-
per and lower display
show OFF. Turn the
temperature knob
to the desired tem-
perature, then press
START/STOP.
When the sear buttons
are pressed, "SEAR"
ashes on the display
then the sear function
goes o .
The sear function
is available once in
every 30 minutes of
the cooking cycle. If
you try to perform a
second sear cycle be-
fore 30 minutes have
elapsed, the operation
will be refused.
Wait 30 minutes be-
fore starting a new
sear cycle.