3
watts, and has to be used only for supplying power to this appliance.
18. Be sure that the plug is fully inserted into an appropriate receptacle. Please remember
that receptacles also deteriorate due to aging and continuous use: check periodically if
signs overheating or deformations are evidenced by the plug. Do not use the recepta-
cle and CALL your electrician.
19. Check that neither the appliance nor the power cable have been damaged in any way
during transportation.
20. CAUTION: to prevent electric shock match wide blade of plug to wide slot, fully insert.
21. Do not cover the appliance while it is functioning in order to avoid overheating with the
attendant risk of fire.
SAVE THESE INSTRUCTIONS
Your product is equipped with a polarized alternating current line plug (a plug having one
blade wider than the other). This plug will fit into the power outlet only one way. This is a
safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If
the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
ELECTRIC CONNECTION
The ceramic heater must be connected to a properly polarized A/C 110/120 V household
outlet in perfect working condition.
Keep loose clothing or bedding, furniture and flammable material away from the wall outlet
where the heater is plugged in.
INSTALLATION
Before plugging the heater into an outlet,
1.Make sure the unit is in the OFF position.
2.Place heater on a firm level surface.
3.Avoid overloading your electrical circuit by not using other high wattage appliances in the
same outlet.
To Next Page
Loading...
