EasyManua.ls Logo

DeLonghi DE320GB - Turbo Power and Maintenance; Turbo Power Operation; Cleaning the Cabinet; Cleaning the Air Filter

DeLonghi DE320GB
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Selecting operating modes / Cleaning
Turbo power
1) Plug the appliance into a mains socket.
2) Check that the “tank full/no tank” warning light is off.
3) Rotate the mode selector to the “TURBO” position. The heating light comes on together
with the maximum, minimum and (for the first three minutes) dehumidifying standby lights;
the heating function at maximum power (1600W) starts up; three minutes after (safety
device) the dehumidifying light come on and the “continuous” dehumidifying function
comes on. The electric power will be 1.990W.
With the Turbo Power function selected, the appliance automatically sets the maximum
humidity level and temperature.
Maintenance
Always remove the plug from the power socket before performing any cleaning or maintenance
operations. For safety reasons, never wash the dehumidifier using a water jet.
Cleaning the cabinet
• Clean the appliance using a damp cloth then dry with a dry cloth.
• Never use petrol, alcohol or solvents to clean the appliance.
Never spray the appliance with insecticides or similar. These could cause the paint to flake or plastic parts to
warp.
Cleaning the air filter
If the filter is dirty, air circulation is compromised and the efficiency of the dehumidifying and air purifying
functions decreases. It is therefore good practice to clean the filter at regular intervals. The frequency
depends on the duration and conditions of operation. If the unit is used constantly or systematically, you
are recommended to clean the filter once a week.
It is good practice to clean the filter weekly.
To remove the air filter, extract by pulling it as shown in fig. 4.
Use a vacuum cleaner to remove dust accumulations from the filter.
If the filter is very dirty, wash in warm water and rinse several times. The
temperature of the water should not exceed 40˚C. After washing the
filter, allow to dry completely before putting it back in the appliance.
If the appliance is not used for long periods
Unplug from the mains socket and empty the tank.
Clean and reposition the filter.
Protect the appliance from dust by covering with a large plastic
bag.
fig. 4
19
ENGLISH
DE320GB 28-05-2001 16:59 Pagina 19

Related product manuals